| 名 稱： |
西門子S7-300,S7-400編程模擬軟件WinSPS-S7 V3 starten |
| 來 源： |
網友上傳
|
| 大 �。� |
17M |
| 上 傳： |
2004/8/31 |
| |
 |
| 說 明： |
西門子S7-300,S7-400編程模擬軟件WinSPS-S7 V3 starten
About WinPLC7
WinPLC7 is a programing and simulation package for SIMATIC-S7 controllers of the type S7-300?and S7-400?as well as the CPUs of the series 11X/811X, 21X/821X.
You can create STEP?-programs on a PC by means of STL and FUP. You can test these PLC programs on the PC without access to a physical PLC. The integrated software-PLC is used exactly like a real S7-PLC. It is also possible to use the software PLC to test the error responses and the diagnostic options via the diagnostic buffer, USTACK and BSTACK.
An MPI-cable is required to communicate with an S7-PLC. This connection can also be used at the higher data communication rates of 57600 and 115200 Baud.
The communications with the CPUs S7-11X/811X, S7-21X/821X can be established via the Green-Cable. In this case you must set the Baudrate to 38400.
WinPLC7 does not support the SIEMENS-S7-200 since this PLC can no longert be programmed by means of STEP?. Furthermore, the hardware protocols are no longer identical to those of the S7-300?400. |
|
|
狀 態(tài)：
離線
會員簡介
|
|
|
會員代號:
|
匿名
|
| 聯(lián) 系 人： |
匿名
|
| 電 話： |
010-000
|
| 傳 真： |
010-000 |
| 地 址： |
中國 |
| 郵 編： |
000000 |
| 主 頁： |
|
|
|
|
|
|
廣告服務| 客服中心
